# Star Puff (Ralf Konrad): Elephant Hide

Designer:
Folder:
Difficulty Level:
Intermediate
Model type:
Triangle Grid
Tessellations and Fractals
Paper ratio:
Hexagon
Review of the paper used:

After having folded this model from transparent paper, I decided this model probably worked better with opaque paper. So here's my fold from elephant hide. I think the picture still doesn't quite show the stars off as nicely as I'd like, and it's not as apparent that in the back you have honeycomb-like dents. But I can say that it is more stunning when you hold it in your hands and look at it.

Paper: hexagon with a side length of 9.75cm (from a 19.5cm square), elephant hide
Model: hexagon with a side length of 5cm, 1cm height

### video

hi Sara
I was wonderin if you can make a video of this model?

### I am stuck!

I folded the original three hexagons, then made another in the bottom-left hand corner. i tried to do the same on the other side, but the crease goes right through the other hexagon! Please Help!

### grids

How many grid divisions did you do for this and could you please explain more on how to bring 19 stars puffed like yours ( in this picture ).Because from the video i could do only three of them. Please do instruct me on hw to do more stars puffed.

### Instructions

Start with a grid with 32 divisions. Then place the first triangle twist as in the video (make a mountain starting in one of the points, going to the center, skip one point, next point minus two grid triangles add the next mountain fold). Make the twist counter-clockwise, fill the rest of the grid with triangle twists. Make a star puff in the center of the model and then two circles around.

-- Sara

### 32?

What do you mean by a 32 grid division. Should there be 32 triangles in all ?

### divisions

no, it means that the length between two opposite edges needs to be divided into 32nds.

-- Sara

### Then 16th

Then the one you showed in the video was 16 grid divisions right?

### Yes

Yes, for the model explained in the video you need 16 divisions.

-- Sara

### arrive

To ARRIVE at this stage should i adhere to the video ( by creating only three hexagonal triangle twists ) or should i start with hexagonal triangle twists in the center

### You can follow the video

Just follow the video for placing the triangle twists. And then add more until the whole sheet is basically filled with them. You'll have to open / fold out the triangle twists so that you get a star puff in the center, though.

-- Sara

### OMG! really beautiful, you

OMG! really beautiful, you dia a great job, congratulations.

### I made it! Thanks for the

I made it! Thanks for the instructions.
Here is a picture:

### Nice folds

Well done! I also checked the other pictures in your origami album, and there are a couple of very nice pieces in there. Keep it up,

-- Sara

### how do you get those pointy

how do you get those pointy edges (when you fold those triangle twists) out of the way?

I'm not sure what you mean. Have you seen the instructional video on how to fold the star puff? What section of the video shows what you mean by "pointy edges"?

-- Sara

### i mean for this particular

i mean for this particular version.when i fold all the triangle twists for this version,there are still
some unwanted parts going along the outside of the hexagon.does this clarify things enough?

### Making a nice finish

Well, I just folded them so that I was happy with the pattern on the edge. I basically folded the unwanted paper behind and probably fiddled around a bit to make them lock nicely enough.
Take a look at the right part of the picture. It shows the model from the back. In the bottom you can see some partial hexagons. Between those there are some completed hexagons. In the picture it's hard to see that half of the hexagon actually has a second layer, and that the raw edge of the paper isn't quite on the edge of the model. This is where my "left-over" paper went.
Hope this helps,

-- Sara

### wow!

Wow! what would i say? your such a talented, ive been trying this before but still i cant do it perfectly, and thanks for sharing this post, it is so useful....

### Tutorial

Please do a tutorial on this!!!

### Thank you so much for taking

Thank you so much for taking the time to have compassion on us mere mortals and doing impromptu diagrams!